Comparative analysis: metallic cimbration x wood cimbration

Authors

  • Pedro Emílio Amador Salomão Universidade Federal dos Vales do Jequitinhonha e Mucuri
  • Hamilton Costa Júinior Universidade Presidente Antônio Carlos
  • Gustavo Botelho Esperança Universidade Presidente Antônio Carlos
  • Acly Ney Santiago de Oliveira Universidade Presidente Antônio Carlos

DOI:

https://doi.org/10.33448/rsd-v8i7.1165

Keywords:

Budget; Anchors; Comparation; Costs; Public works.

Abstract

This article is inserted in the scope of construction planning, and it sought to compare construction techniques aiming at their best cost benefit, seeking to achieve efficiency and economy for the project proposed and maintaining the quality of the service. It is of utmost relevance to understand more deeply the various execution procedures provided by engineering because they tend to clarify the pros and cons of the project, which is essential for the decision making process. This work aims to carry out a comparative study between two technologies of formwork performance, using metallic and wooden materials. The study was carried out through the application of these technologies in the planning of the construction project of the Teaching Pavilion of the Military School of Belém, Pará, using a reference pricing list from the Secretariat of Public Works of the State of Pará. The study analyzed the labor cost, the material and the total value of each construction technique as well as their respective execution time. It was verified that the wooden formwork presented greater viability, representing an economy of approximately 14% in relation to the metallic formwork for the project aforementioned. Therefore, for the case analyzed, the wooden formwork proved to be more viable, reducing the construction cost by approximately R$ 130,000.

References

Associação Brasileira de Cimento Portland. Fôrmas. Disponível em: http://www.dptoce.ufba.br/construcao1_arquivos/F%F4rmas_ABCP.pdf . Acesso: 17 de set. 2007.

Associação Brasileira de Cimento Portland. Escoramento. Disponível em: http://www.comunidadedaconstrucao.com.br/comunidade/filesmng.nsf/Ativos/cimbramento.pdf/$File/cimbramento.pdf . Acesso: 17 de set. 2007.

Barcelos, C. A. A. (2014). Pró-Reitoria de Graduação Curso de Engenharia Civil Trabalho de Conclusão de Curso.

Batista, A.M. & Mascia, N.T. (2006). Escoras metálicas empregadas em cimbramentos para edificações em concreto armado. In: Anais da XXXII Jornadas Sulamericanas de Engenharia Estrutural.

COMUNIDADE DA CONSTRUÇÃO. Cimbramento: sistemas. S.L., 2015.

Cristina, P., Salomão, P. E. A., Cangussú, L., & de Carvalho, P. H. V. (2018). Tijolo solo cimento com adição de fibra vegetal: uma alternativa na construção civil. Research, Society and Development, 7(9), 12.

COMUNIDADE DA CONSTRUÇÃO. Fôrmas – materiais. S.L., 2015.

Do Carmo, E.J.Z. (2007). Fôrmas e escalonamento. Monografia, Engenharia Civil da Universidade São Francisco

GUILHERME, Marcos Roberto. Apostila de escoramento (material interno Mecan industria e locação de equipamentos para construção civil). 2004.

Holanda, E.P.T. (2003). Novas tecnologias construtivas para produção de vedações verticais: diretrizes para o treinamento da mão-de-obra. Tese de Doutorado. Universidade de São Paulo.

JÚNIOR, FINOCCHIO et al. Fundamentos do Gerenciamento de Projetos. Rio de Janeiro: Editora FGV, 2007, 170p.

Pereira, A.S.; Shitsuka, D.M.; Parreira, F.J. & Shitsuka, R. (2018). Metodologia da pesquisa científica. [e-book]. Ed. UAB/NTE/UFSM, Santa Maria/RS. Disponível em: http://repositorio.ufsm.br/bitstream/handle/1/15824/Lic_Computacao_Metodologia-Pesquisa-Cientifica.pdf?sequence=1

PMBOK, GUIA. Um guia do conjunto de conhecimentos em gerenciamento de projetos (guia pmbok®). em português. Project Management Institute, Inc. EUA, 2008.

Salomão, P. E. A., Porto, T. B., Cabrai, S. C., da Silva, W. L., & de Oliveira, A. N. S. (2018). Elaboration of tables for concrete dosage based on the aggregates used in Northeast Mineiro. Research, Society and Development, 7(4), 1274305.

Salomão, P. E. A., Oliveira, L. L. S., Rhis, A. R., & Coelho, S. S. F. (2019). Analysis and study of materials for perutable floor water advantage when compared with conventional pavement. Research, Society and Development, 8(4), 3584912.

Secretaria de Estado e Desenvolvimento Urbano e Obras Públicas do Estado do Pará, SEDOP. Disponível em: http://www.sedop.pa.gov.br/index.php/component/content/article/2-sem-categoria/102-planilha-de-custo-abril-2019

Downloads

Published

29/05/2019

How to Cite

SALOMÃO, P. E. A.; COSTA JÚINIOR, H.; ESPERANÇA, G. B.; OLIVEIRA, A. N. S. . de. Comparative analysis: metallic cimbration x wood cimbration. Research, Society and Development, [S. l.], v. 8, n. 7, p. e36871165, 2019. DOI: 10.33448/rsd-v8i7.1165. Disponível em: https://www.rsdjournal.org/index.php/rsd/article/view/1165. Acesso em: 20 apr. 2024.

Issue

Vol. 8 No. 7

Section

Engineerings

License

Authors who publish with this journal agree to the following terms:

1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.