Minimizing environmental impacts caused by textile waste: A practical perspective
DOI:
https://doi.org/10.33448/rsd-v10i2.12215Keywords:
Composites; Polymeric Matrix; Polyester; Recycled polypropylene; Sustainability.Abstract
The environmental concern with the residues generated by the textile industry's productive processes encouraged the development of research in the area. The development of new materials from the waste generated by it is an alternative to dispose of all the accumulated material, thus adding a new application. As the construction sector also plays an important role in relation to environmental degradation in the urban environment, the search for materials aimed at sustainability in the sector is growing, requiring several researches that seek the development of new materials for the sector. In view of these considerations, it was sought to develop an alternative material from polyester residues incorporated in a recycled polymer matrix. The obtained materials were characterized by Granulometry and SEM, making it possible to identify their properties and define which is the best methodology to be used for making the specimens. Then composite materials were prepared using different polyester incorporations (10%, 20%, 30%, 40% and 50%) in relation to the recycled polypropylene matrix. With the analysis of the tensile tests it was possible to determine that the best results obtained occurred considering the incorporation of 16.5% of fiber in the recycled polypropylene matrix, given this confirmed by subsequent tensile and impact tests.
References
Aciu, C., Ilutiu-varvara, D-A, Manea, D-L., Orban, Y-A., & Babora, F. (2018). Recycling of plastic waste materials in the composition of ecological mortars. Procedia Manufacturing, 22, 274-279.
Albach, B., Vianna, S. P. H, Rampon, D. S., & Barbosa, R.V. (2019) An evaluation of modified Kaolinite surface on the crystalline and mechanical behavior of polypropylene. Polymer Testing, 75, 237-245.
Ali Mohsin, M. E., Ibrahim, A. N., Arsad, A., ABD Rahman, M. F., & Alothman, O. Y. (2015) Effect of polypropylene, ethylene vinyl acetate and polyamide-6 on properties of recycled polypropylene/empty fruit bunch composites. Fibers and Polymers, 16, 2359-2367.
Amorim, C. C., Leão, M. M. D., & Moreira, R. F. P. M. (2019). Comparação entre diferentes processos oxidativos avançados para degradação de corante azo. Engenharia Sanitária e Ambiental, 14, 543-550.
Arsad, A., Suradi, N. L., Rahmat, A. R., Danlami, J. M. (2013). The influence of kenaf fiber as reinforcement on recycled polypropylene/recycled polyamide-6 composites. International Journal of Plastics Technology, 17, 149-162.
American Society For Testing And Materials. ASTM D256-10e1: standard test methods for determining the izod pendulum impact resistance of plastics. Philadelphia, 2010.
American Society For Testing And Materials. ASTM D638-10: standard test method for tensile properties of plastics. Philadelphia, 2010.
Aygormez, Y., Canpolat, O., AL-MashhadanI, M. M., & Uysal, M. (2020). Elevated temperature, freezing-thawing and wetting-drying effects on polypropylene fiber reinforced metakaolin based geopolymer composites. Construction and Building Materials, 235, 117-502.
Barbosa, J. T. L. Caracterização de compósitos poliméricos feitos com resíduos pós-consumo (poliestireno de alto impacto) e industriais (lama vermelha e fibra de vidro/resina epóxi). Dissertação, Universidade Estadual Paulista Júlio Mesquita Filho, São Paulo, 2019.
Becker, D., Kleinschmidt, A. C., Balzer, P. S., & Soldi, V. (2011). Influência da sequência de mistura do PP-MA nas propriedades dos compósitos de PP e fibra de bananeira. Polímeros, 21, 7-12.
Bedekar, P. A., Bhalkar, B. N., Patil, S. M., & Govindwar, S. P. (2016). Moringa oleifera-mediated coagulation of textile wastewater and its biodegradation using novel consortium-BBA grown on agricultural waste substratum. Environmental Science and Pollution Research, 23, 20963-20976.
Beh, E. J., Lombardo, R., & Alberti, G. (2018). Correspondence analysis and the Freeman–Tukey statistic: A study of archaeological data. Computational Statistics & Data Analysis, 128, 73-86. 2018.
Bittencourt, A., Mariot, H., Ribeiro, A., Campos, D., Marques, C., & Resmini, M. A. (2018). Estudo da Influência da Granulometria e da Carga Mineral em Resina Epóxi Utilizada em Fachada Ventilada. Cerâmica industrial, .23, 13-23.
Borsoi, C., Scienza, L. C., Zattera, A. J., & Angrizani, C. C. (2011). Obtenção e caracterização de compósitos utilizando poliestireno como matriz e resíduos de fibras de algodão da indústria têxtil como reforço. Polímeros, 21, 271-279.
Carpio, M., Roldán-Fontana, J., Pacheco-Torres, R., & García, J. (2016). Construction waste estimation depending on urban planning options in the design stage of residential buildings. Construction and Building Materials, 113, 561-570.
Costa, M. A. (2018). Como avaliar o alcance dos Objetivos de Desenvolvimento Sustentável? Desafios e possibilidades para a agenda global de avaliação. Revista Brasileira de Políticas Pública e Internacionais, 3, 100-123.
Dissanayake, D. G. K., Weerasinghe, D. U., Wijesinghe, K. A. P., & Kalpage, K. M. D. M. P. (2018). Developing a compression moulded thermal insulation panel using postindustrial textile waste. Waste Management, 79, 356-361.
Djonú, P., Rabelo, L. S., Lima, P. V. P. S., Souto, M. V. S., Sabadia, J. A. B., & Sucupira Junior, P. R. G. (2018). Objectives of sustainable development and conditions of health risk areas. Ambiente & Sociedade, 21.
Dria, R., Gasperi, J., Rocher, V., & Tassin, B. Synthetic and non-synthetic anthropogenic fibers in a river under the impact of Paris Megacity: Sampling methodological aspects and flux estimations. Science of The Total Environment, 618, 157-164. 2018. https://doi.org/10.1016/j.scitotenv.2017.11.009
Echeverria, C. A., Pahlevani, F., Handoko, W., Jiang, C., Doolan, C., & Sahajwalla, V. (2019). Engineered hybrid fibre reinforced composites for sound absorption building applications. Resources, Conservation and Recycling, 43, 1-14.
Firmino, H. C. T., Chagas, T. F., Melo, P. M. A., & Silva, L. B. (2017). Caracterização de compósitos particulados de polietileno de alta densidade/pó de concha de molusco. Matéria, 22.
Freeman, M. F., & Tukey, J. W. (1950). Transformations Related to the Angular and the Square Root Ann Math Statist. 21, 607-611.
Gupta, A., Biswal, M., Mohanty, S., & Nayak, S. (2014). Mechanical and Thermal Degradation Behavior of Sisal Fiber (SF) Reinforced Recycled Polypropylene (RPP). Composites Fibers and Polymers, 15, 994-1003.
Haslinger, S., Hummel, M., Anghelescu-Hakala, A., & Maettanem, S. H. (2019). Upcycling of cotton polyester blended textile waste to new man-made cellulose fibers. Waste Management, 97, 88-96.
Hu, Y., Du, C., Leu, S.Y., Jing, H., Li, X., & Lin, C. S. K. (2018). Valorisation of textile waste by fungal solid state fermentation: An example of circular waste-based biorefinery. Resources, Conservation and Recycling, 129, 27-35.
Karbalaei, S., Hanachi, P., Walker, T. R., & Cole, M. (2018). Occurrence, sources, human health impacts and mitigation of microplastic pollution. Environmental Science and Pollution Research, 25, 36046-36063.
Klapiszewski, L. et al. (2019). Kraft lignin/cubic boron nitride hybrid materials as functional components for abrasive tools. International Journal of Biological Macromolecules, 122, 88-94.
Martin, L., & Perry, F. Sustainable Construction Technology Adoption. In: Tam VWY, Le KN. (2019). Sustainable construction technologies, 299-316.
Militky, J. (2018). Tensile failure of polyester fibers. In: Bunsell AR (ed) Handbook of Properties of Textile and Technical Fibres (Second Edition). Woodhead Publishing, 421-514.
Nielfa, A., Cano, R., & FDZ-Polanco, M. (2015). Theoretical methane production generated by the co-digestion of organic fraction municipal solid waste and biological sludge. Biotechnology reports, 5, 14-21.
Novaes, C. G., Yamaki, R. T., & Paula, V. F., Nascimento Júnior, B. B., Barreto, J. A., Valasques, G. S., Bezerra, M. A. (2017). Otimização de métodos analíticos usando metodologia de superfícies de resposta. Revista Virtual de Química.
Obaid, N., Kortschot, M. T., & Sain, M. (2018).Predicting the stress relaxation behavior of glass-fiber reinforced polypropylene composites. Composites Science and Technology, 161, 85-91.
Ogunola, O. S., Onada, O. A., & Falaye, A. E. (2018). Mitigation measures to avert the impacts of plastics and microplastics in the marine environment (a review). Environmental Science and Pollution Research, 25, 9293-9310.
Pereira A. S. et al. (2018). Metodologia da pesquisa científica. UFSM.
Qin, Y., Zhang, X., Chai, J., Xu, Z., & Li, S. (2019). Experimental study of compressive behavior of polypropylene-fiber-reinforced and polypropylene-fiber-fabric-reinforced concrete. Construction and Building Materials, 194, 216-225.
R D Cook, & S Weisberg (1982) Residuals and influence in regression. Chapman and Hall, London
Rokbi, M., Khaldoune, A., Sanjay, M. R., Senthamaraikannan, P., Ati, A., & Siengchin, S. (2019). Effect of processing parameters on tensile properties of recycled polypropylene based composites reinforced with jute fabrics. International Journal of Lightweight Materials and Manufacture, 3, 144-149.
Saccani, A., Manzi, S., Lancellotti, I., & Lipparini, L. (2019). Composites obtained by recycling carbon fibre/epoxy composite wastes in building materials. Construction and Building Materials, 04, 296-302.
Silva, D. N. S. (2017). Estudo e Caracterização Mecânica de Compósitos de Matriz Polimérica Reforçado com Fibras de Eucalipto. Dissertação, Universidade do Porto.
Silva, G. C., Ladeira, G. F. X., Nascimento Júnior, H., & Carneiro, J. R. G. (2019). Estudo da substituição do nylon por compósito de polipropileno com fibra de vidro. Matéria.
Sharma, S., Sudhakara, P., Nijar, S., Saini, S., & Singh, G. (2018). Recent Progress of Composite Materials in various. Novel Engineering Applications Materials Today: Proceedings, 5, 28195-28202.
Spadetti, C., Silva Filho, E. A., Sena, G. L., & Melo, C. V. P. (2017). Propriedades térmicas e mecânicas dos compósitos de Polipropileno pós-consumo reforçados com fibras de celulose Polímeros, 27, 84-90.
Suharty, N., Ismail, H., Diharjo, K., Handayani, D., & Firdaus, M. (2016). Effect of Kenaf Fiber as a Reinforcement on the Tensile, Flexural Strength and Impact Toughness Properties of Recycled Polypropylene/Halloysite. Composites Procedia Chemistry, 19, 253-258.
Szopik-Depczynska, K., Kedzierska-Szczepaniak, A., Szczepaniak, K., Cheba, K., Gajda, W., & Ioppolo, G. (2018). Innovation in sustainable development: an investigation of the EU context using 2030 agenda indicators. Land Use Policy, 79, 251-262.
Todkar, S. S., Patil, S. A. (2019) Review on mechanical properties evaluation of pineapple leaf fibre (PALF) reinforced polymer composites. Composites Part B: Engineering, 174, 106927.
Triñanes, S., Rodriguez-Mier, P., Cobas, C., Sánchez, E., Phan-Tan-Luu, R., & Cela, R. (2019). Robustness assessment in computer-assisted liquid chromatography procedures based on desirability functions. Journal of Chromatography, v.1609.
Candioti, V. L., Zan, M. M., Cámara, M. S., & Goicoechea, H. C. (2014). Experimental design and multiple response optimization. Using the desirability function in analytical methods development. Talanta, 124, 123-138. 201.
Wanassi, B., Hariz, I. B., Ghimbeu, C. M., Vaulot, C., Hassen, M. B., & Jeguirim, M. (2017). Carbonaceous adsorbents derived from textile cotton waste for the removal of Alizarin S dye from aqueous effluent: kinetic and equilibrium studies. Environmental Science and Pollution Research, 24, 10041-10055.
W D Callister (2012) Ciência e Engenharia de Materiais: Uma introdução. Chapman and Hall.
Xu, X., Wang, Y., & Tao, L. (2019). Comprehensive evaluation of sustainable development of regional construction industry in China. Journal of Cleaner Production, 211, 1078-1087.
Zeller, V., Towa, E., Degrez, M., & Achten, W. M. J. (2018). Urban waste flows and their potential for a circular economy model at city-region level. Waste Management. 83, 83-94.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Ana Carolina Dias de Albuquerque; Marla Corso; Lilian Keylla Berto; Flávia Aparecida Reitz Cardoso; Eliane Carvalho de Vasconcelos; Silvia Lucia Favaro; Luciana Cristina Soto Herek Rezende
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
