Ultra-high performance concrete made from the insertion of glass residues as supplementary cement material
DOI:
https://doi.org/10.33448/rsd-v10i7.16988Keywords:
Glass Residue; UHPC Systems; Sustainability.Abstract
Portland cement concrete manufacturing techniques in the world have an immense variability, since each location concentrates natural resources with unique characteristics, sometimes similar, but with always different process conditions, such as: labor, equipment, environmental conditions, processing, storage, among others. The aim of this work is to develop cementitious composites partially replacing mineral admixtures by powdered glass residues, evaluating the physical-mechanical behavior through axial compression strength, as well as the production of hydrated phases through x-ray diffraction, both at 28 days. Cement, silica fume, metakaolin, powder glass residue, polycarboxylic ether-based superplasticizer, and low temperature water were used to prepare different compositions of ultra-high performance concrete. The preparation took place with the aid of a mechanical bench mixer, and the densification was carried out with the aid of an immersion vibrator in cylindrical molds 50 x 100 mm. After unshaped, the specimens received heat treatment, with isotherm at 60°C for 36 hours, followed by wet curing in a tank saturated with calcium hydroxide, until the tests of compression strength and x-ray diffraction were carried out. The results show that the composition added with the residue, replacing metakaolin, behaved in an adequate manner, with compressive strength equivalent to the reference composition (silica fume + metakaolin), as well as the production of the same hydrated compounds. However, the application of only the glass residue or metakaolin reduced the intensity of the pozzolanic reactions, justified by the presence of a high content of calcium hydroxide in the compositions, which allows us to conclude that the powder glass residue presents viability as a filler, when replacing metakaolin in the presence of silica fume, as it does not compromise the performance of the mixtures made.
References
Associação Brasileira de Normas Técnicas. NBR 5738 – Concreto – Procedimento para moldagem e cura de corpos de prova. Rio de Janeiro, 2015.
Associação Brasileira de Normas Técnicas. NBR 5739 – Concreto – Ensaio de compressão de corpos de prova cilíndricos. Rio de Janeiro, 2018.
Bauer, L. A. F. (2019). Materiais de Construção – Vol. 1 (6. ed.). Rio de Janeiro: LTC.
Cunha Oliveira, J. V. (2020). State of the art of the development of sustainable concrete for applications in conventional structures. Research, Society and Development, 9 (11), 1-19. http://dx.doi.org/10.33448/rsd-v9i11.10272
Cunha Oliveira, J. V., Chagas, L. S. V. B., Meira, F. F. D. A., Carneiro, A. M. P., & Melo Neto, A. A. (2020). Study of the potential of adhesion to the substrate of masonry and tensile in the flexion in mortars of coating with gray of the sewage sludge. Materials Science Forum, 1012, 256-261. https://doi.org/10.4028/www.scientific.net/MSF.1012.256
Cunha Oliveira, J. V., Meira, F. F. D. A., & Lucena, K. F. M. (2021a). Application of mineral admixtures and steel fibers in experimental compositions for reactive powders concrete. Research, Society and Development, 10 (1), 1-18. http://dx.doi.org/10.33448/rsd-v10i1.11910
Cunha Oliveira, J. V., Meira, F. F. D. A., & Lucena, K. F. M. (2021b). Highlights on the properties of the soda-lime-silicate glass residue that enable its use as filler in ultra-high performance concrete. Research, Society and Development, 10 (3), 1-11. http://dx.doi.org/10.33448/rsd-v10i3.13801
Dixit, A., Du, H., & Pang, S. D. (2020). Marine clay in ultra-high-performance concrete for filler substitution. Construction and Building Materials, 263, 120250. https://doi.org/10.1016/j.conbuildmat.2020.120250
Dong, Y. (2018). Performance assessment and design of ultra-high performance concrete (UHPC) structures incorporating life-cycle cost and environmental impacts. Construction and Building Materials, 167, 414-425. https://doi.org/10.1016/j.conbuildmat.2018.02.037
Hiremath, P. N., & Yaragal, S. C. (2017). Influence of mixing method, speed and duration on the fresh and hardened properties of Reactive Powder Concrete. Construction and Building Materials, 141, 271-288. http://dx.doi.org/10.1016/j.conbuildmat.2017.03.009
Jiang, Y., Ling, T. C., Mo, K. H., & Shi, C. (2019). A critical review of waste glass powder – Multiple roles of utilization in cement-based materials and construction products. Journal of Environmental Management, 242, 440-449. https://doi.org/10.1016/j.jenvman.2019.04.098
Kang, S. H., Hong, S. G., & Moon, J. (2019). The use of rice husk ash as reactive filler in ultra-high performance concrete. Cement and Concrete Research, 115, 389-400. https://doi.org/10.1016/j.cemconres.2018.09.004
Kusumawardaningsih, Y.; Fehling, E.; Ismail, M., & Aboubakr, A. A. M. (2015). Tensile strength behavior of UHPC and UHPFRC. Procedia Engineering, 125, 1081-1086. http://dx.doi.org/10.1016/j.proeng.2015.11.166
Liu, T., Wei, H., Zou, D., Zhou, A., & Jian, H. (2020). Utilization of waste cathode ray tube funnel glass for ultra-high performance concrete. Journal of Cleaner Production, 249, 119333. https://doi.org/10.1016/j.jclepro.2019.119333
Matte, V. (1999). Durabilite des betons a ultra hautes performances: role de la matrice cimentaire. Thèse de doctorat, L'Ecole Normale Superieure De Cachan et L'Universite De Sherbrooke, Sherbrooke, Quebec, Canada.
Medina, E. A. (2011). Pozolanicidade do metacaulim em sistemas binários com cimento Portland e hidróxido de cálcio. Dissertação de mestrado, Escola Politécnica da Universidade de São Paulo, São Paulo, SP, Brasil.
Richard, P., & Cheyrezy, M. (1995). Composition of reactive powder concretes. Cement and Concrete Research, 25 (7), 1501-1511. https://doi.org/10.1016/0008-8846(95)00144-2
Santos, B. S., Albuquerque, D. D. M., & Ribeiro, D. V. (2020). Effect of the addition of metakaolin on the carbonation of Portland cement concretes. IBRACON Structures and Materials Journal, 13 (1), 1-18. http://dx.doi.org/10.1590/S1983-41952020000100002
Sohail, M. G., Kahraman, R., Nuaimi, N. A., Gencturk, B., & Alnahhal, W. (2021). Durability characteristics of high and ultra-high performance concretes. Journal of Building Engineering, 33, 101669. https://doi.org/10.1016/j.jobe.2020.101669
Soliman, N. A., & Tagnit-Hamou, A. (2016). Development of ultra-high-performance concrete using glass powder – Towards ecofriendly concrete. Construction and Building Materials, 125, 600-612. https://doi.org/10.1016/j.conbuildmat.2016.08.073
Soliman, N. A., & Tagnit-Hamou, A. (2017a). Using glass sand as an alternative for quartz sand in UHPC. Construction and Building Materials, 145, 243-252. https://doi.org/10.1016/j.conbuildmat.2017.03.187
Soliman, N. A., & Tagnit-Hamou, A. (2017b). Partial substitution of silica fume with fine glass powder in UHPC: Filling the micro gap. Construction and Building Materials, 139, 374-383. https://doi.org/10.1016/j.conbuildmat.2017.02.084
Tafraoui, A., Escadeillas, G., & Vidal, T. (2016). Durability of the Ultra High Performances Concrete containing metakaolin. Construction and Building Materials, 112, 980-987. http://dx.doi.org/10.1016/j.conbuildmat.2016.02.169
Vanderlei, R. D. (2004). Análise experimental do concreto de pós reativos: dosagem e propriedades mecânicas. Tese de doutorado, Universidade de São Paulo, São Carlos, SP, Brasil.
Wang, X., Yu, R., Shui, Z., Zhao, Z., Song, Q., Yang, B., & Fan, D. (2018). Development of a novel cleaner construction product: Ultra-High Performance Concrete incorporating lead-zinc tailings. Journal of Cleaner Production, 196, 172-182. http://dx.doi.org/10.1016/j.jclepro.2018.06.058
Yang, R., Yu, R., Shui, Z., Gao, X., Xiao, X., Fan, D., Chen, Z., Cai, J., Li, X., & He, Y. (2020). Feasibility analysis of treating recycled rock dust as an environmentally friendly alternative material in Ultra-High Performance Concrete (UHPC). Journal of Cleaner Production, 258, 120673. https://doi.org/10.1016/j.jclepro.2020.120673
Zhang, B.; He, P., & Poon, C. S. (2020). Improving the high temperature mechanical properties of alkali activated cement (AAC) mortars using recycled glass as aggregates. Cement and Concrete Composites, 112, 103654. https://doi.org/10.1016/j.cemconcomp.2020.103654
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 João Victor da Cunha Oliveira; Crislene Rodrigues da Silva Morais; Frankslale Fabian Diniz de Andrade Meira
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
