Structural steel shed solution

Authors

DOI:

https://doi.org/10.33448/rsd-v10i8.17765

Keywords:

Structural design; Steel structure; Cold formed profiles; Hot formed profiles.

Abstract

In Brazil, one of the most used materials in civil construction is steel, because it has a number of advantages such as: high strength; high ductility; high degree of reliability; smaller and more organized construction site; great ease of reinforcement and expansion; speed of execution. Most steel constructions are horizontal, single-story structures. The sheds make up a large part of this portion, with more versatile and economical solutions that provide large free spans, with a high degree of responsibility, which requires special attention and is essential to be performed by qualified professionals. In view of the demand for qualified professionals and the great growth of the use of steel as a structural system in civil construction, this paper seeks to offer a design guide for the steel structure of a typical shed in the region of Caruaru - PE, which uses cold formed profiles (CFP) in the roof system and hot rolled profiles for the pillars. The SAP2000 software will be used for the modeling and structural analysis of the shed, promoting the appropriate procedure for the structural dimensioning obeying all the pertinent norms, besides doing all the detailing, manufacturing and assembly plans and quantities necessary for the execution of the work. The dimensioning of the structure is pointed out as something complex, being necessary a lot of prudence mainly in the verifications of the connections, because they are largely responsible for the collapse of steel structures, and occur without warning.

References

ABNT. (2019) – Associação Brasileira de Normas Técnicas. NBR 6120:2019 – Ações para o cálculo de estruturas de edificações.

ABNT. (1988) – Associação Brasileira de Normas Técnicas. NBR 8681:1988 – Forças devido ao vento em edificações.

ABNT. (2003) – Associação Brasileira de Normas Técnicas. NBR 8681:2003 – Ações e segurança nas estruturas - Procedimento.

ABNT. (2008) – Associação Brasileira de Normas Técnicas. NBR 8800:2008 – Projeto de estruturas de aço e de estruturas mistas de aço e concreto de edifícios.

ABNT. (2010) – Associação Brasileira de Normas Técnicas. NBR 14762:2010 – Dimensionamento de estruturas de aço constituídas por perfis formados a frio.

Bellei, I. H., Pinho, F. O., & Pinho, M. O. (2008). Edifícios de múltiplos andares em aço. Pini, 2, 558.

CBCA. (2020). Centro Brasileiro de Construção em Aço. O sucesso do aço na construção civil. Arquitetura & Aço, 57, 70–81.

Centro Brasileiro da construção em aço. (2015). Evolução e perspectivas da construção em aço no Brasil. Arquitetura & Aço, 42, 60-61.

Computers and Structures Inc. (2020). SAP2000 (Version. 20.2.0). Structural Analysis Program.

Fakury, R. H., Silva, A. L. R. D. C. E., & Caldas, R. B. (2016). Dimensionamento de elementos estruturais de aço e mistos de aço e concreto. Pearson Education do Brasil.

Flick, U. (2009). Desenho da pesquisa qualitativa. Artmed.

Fisher, J. M., & Klaiber, L. A. (2006). Base plate and anchor rod design. Steel Design Guide 1. American Institute of Steel Construction.

GERDAU. (2020). Perfis GERDAU - Construção metálica: tabela de bitolas. Tabela de Bitolas. https://www2.gerdau.com.br/catalogos-e-manuais.

Google Earth-Mapas (2021). http://mapas.google.com.

GRAVIA. (2013). Catálogo Técnico. https://www.gravia.net.br/industria-de-perfilados/download/catalogo-tecnico-2013.pdf.

KINGSPAN ISOESTE. (2020). Catálogos de produtos. https://downloads.kingspan-isoeste.com.br/catalogos/Linha-de-Produtos.pdf.

Malhotra, N., Rocha, I., & Laudisio, M.C. (2005). Introdução à Pesquisa de Marketing. Pearson Prentice Hall.

MEDABIL. (2020) Mitos e Verdades sobre estruturas metálicas na construção civil. https://www.medabil.com.br/tudo-sobre-construcao-com-aco.

Pereira, A. S., Shitsuka, D. M., Parreira, F. J. & Shitsuka, R. (2018). Metodologia da pesquisa científica. UAB/NTE/UFSM.

Pillar, R. V. (2013). Estudo de viabilidade de cobertura metálica com alternativas em perfis formados a frio, laminados abertos ou tubulares. Universidade Federal do Rio de Janeiro. p. 83.

Xerez Neto, J., & Cunha, A. S. (2020). Estruturas metálicas: manual prático para projetos, dimensionamento e laudos técnicos. Oficina de Textos, 2, 448.

Downloads

Published

17/07/2021

How to Cite

SILVA, L. G. P.; LIMA, D. M. de; MEDEIROS, I. da S.; LÓPEZ-YÁNEZ, P. A. Structural steel shed solution. Research, Society and Development, [S. l.], v. 10, n. 8, p. e54810817765, 2021. DOI: 10.33448/rsd-v10i8.17765. Disponível em: https://www.rsdjournal.org/index.php/rsd/article/view/17765. Acesso em: 19 apr. 2024.

Issue

Vol. 10 No. 8

Section

Engineerings

License

Copyright (c) 2021 Lucas Gabriel Pereira Silva; Douglas Mateus de Lima; Iálysson da Silva Medeiros; Pablo Aníbal López-Yánez

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.