3D temporary crowns X analog crowns: experimental research
DOI:
https://doi.org/10.33448/rsd-v10i14.22117Keywords:
Temporary crowns; 3D impression; CADCAM.Abstract
Temporary crowns are a fundamental part of rehabilitative treatments, essential to maintain the marginal integrity of the tooth preparation, as well as to protect the dentine pulp complex in order to avoid sensitivity, caries and gingival problems. Currently, there are several techniques for its manufacture, based on acrylic resin derivatives and the latest technologies. This work aimed to perform an experimental research with 3 types of techniques in order to verify their advantages and disadvantages, working time, which materials are necessary for their use, and to verify the knowledge of dental surgeons about the most current technologies. We can conclude that all techniques have significant advantages and disadvantages, and that all are useful in the daily routine of the dentist, regardless of how long he or she has been working there, although the most recent technology is still unviable in many offices due to its high cost.
References
Abdullah, A. O., Tsitrou, E. A., & Pollington, S. (2016). Comparative in vitro evaluation of CAD/CAM vs conventional provisional crowns. Journal of applied oral science, 24(3), 258–263.
Alnassar, T. et al. Shear bond strength of bis-acryl resin provisional material repaired using a flowable composite. Journal of adhesion science and Technology, 32(6), 573-579.
Baião, F. J. Funcionalidades e Tecnologias da impressora 3D. Monografia apresentada ao curso de Engenharia de Computação da Universidade São Francisco, Itatiba, 2012.
Burns, D. R., Beck, D. A., Nelson, S. K., & Nelson, S. K. A review of selected dental literature on contemporary provisional fixed prosthodontic treatment: Report of the Committee on Research n Fixed Prosthodontics of the Academy of Fixed Prosthodontics. J Prosthet Dent 2003;90(5):474-497
Camacho, D. P. Svidzinki, T. I. E. Furlaneto, M. B. L. & Correa, G. O. Resina Acrílicas de Uso Odontológico à Base de Polimetilmetacrilato. – Brazilian Journal of Surgery and Crinical Reserach, 6(3), 63-72.
Cauduro, A. L. Alves, A.P. R. Neves, A. C. C. Patrocinio, M. C. & Rode, S. M. Analise da rugosidade superficial de uma resina composta fotopolimerizavel e uma resina acrílica termopolimerizavel para facetas protéticas. Rev biociênc. 9(4), 25-30.
Coimbra, J., Almeida, B., & Viana, H. (2017). Coroas Provisórias No Tratamento Restaurador:. Revista De Odontologia Contemporânea, 1(1). https://doi.org/10.31991/2594-8474/v1n12017/coroa
Dickens, N., Haider, H., Lien, W., Simecek, J., & Stahl, J. (2018). Longitudinal Analysis of CAD/CAM Restoration Incorporation Rates into Navy Dentistry. Military Medicine.
Mezzomo, E e Cols. Prótese Parcial Fixa - Manual de Procedimentos. Ed, Santos, 2004.
Pegoraro, L. F. (2004). Prótese Fixa, Artes Médicas.
Pivesso, P. B. (2018). Efeito da velocidade de polimerização na qualidade da impressão 3D DLP de uma resina odontológica experimental fotopolimerizável – Dissertação apresentada ao Instituto de Química de São Carlos da Universidade São Paulo.
Polido, D. W. Moldagens digitais e manuseio de modelos digitais: o futuro da Odontologia. Dental Press J. Orthod. 15(5), https://doi.org/10.1590/S2176-94512010000500003
Protocolo de confecção de Provisórios em próteses parciais fixas (PPF) e próteses unitárias fixas (PUF) Tuesday, 28 September 2010 17:41 - Last Updated Tuesday, 28 September 2010
Rosenstiel, S. (2005). Prótese fixa contemporânea, (3a. ed.), Editora Santos
Silva, J. U. C. Técnica alternativa de confecção de provisórios para laminados e coroas metal-free. 2011. 15 f. (Trabalho de Conclusão de Curso – Graduação). Faculdade de Odontologia, Universidade Estadual Paulista, Araçatuba, 2011.
Simoneti, D. M. e S. Coroas dentárias temporárias em impressão 3D / Débora Meincke Simoneti; Tatiana Pereira Cenci, orientadora ; Mateus Bertolini Fernandes dos Santos, coorientador. — Pelotas, 2018.
Torres, T. S., Melo, B. C., Negrão L. M. A, Vasconcelos, G. L. L, & Salles, M. M. Efeito de bebidas coradas na estabilidade de cor de resinas acrílicas polimerizadas por diferentes métodos. J Orof Invest. 2019;6(2): 18-27
Tylman, S.; Malone, W. F. P.; & Koth, D.; Teoria e prática de prótese fixa de Tylman, Editora Artes Médicas (8a ed.).
Vasconcelos, B. E., Farias, R. S., Matos, J. D. M., Lima, J. F. M., Castro, D. S. M., & Zogheib, L. V. A tecnologia 3D e suas aplicações na Odontologia moderna – uma revisão sistemática de literatura. Full Dent. Sci. 2018; 10(37):
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Luiz Otavio Rovina Arroio; Caroline Liberato Marchiolli; Maria Eduarda de Freitas Santana Oliveira; Jessica Monique Lopes Moreno
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
