Process analysis of a furniture micro-enterprise by conceptual modeling and dynamic simulation

Authors

DOI:

https://doi.org/10.33448/rsd-v9i2.2255

Keywords:

Simulation; Furniture; Process.

Abstract

This article aims to evaluate the current layout of a furniture make-to-order shop floor in Itabira-MG. The chosen process was the manufacturing of Medium-Density Fiberboard (MDF) tables. The analysis is done through conceptual modeling called IDEF-SIM and dynamic simulation through the software FlexSim. The results prove the intense use of labor that is frequent in make-to-order production companies of the sector and suggests new studies of physical arrangement to optimize the productivity of the company.

References

Costa, A.J. (2004). Otimização do layout de produção de um processo de pintura de ônibus (Dissertação de Mestrado). Universidade Federal do Rio Grande do Sul – UFRGS, Porto Alegre, RS, Brasil.

Mendonça, M.M., Miranda, R.C. & Montevechi, J.A.B. (2013). Aplicação da modelagem conceitual IDEF-SIM ao software de modelagem computacional SIMUL8: um caso prático. XXXIII Encontro Nacional de Engenharia de Produção.

Miyake, D.I. & Sakurada, N. (2009). Aplicação de simuladores de eventos discretos no processo demodelagem de sistemas de operações de serviços. Gestão & Produção, 16 (1): 25-43.

Nordgren, W. B. (2013). FlexSim Simulation Environment. Proceedings of the 2013 Winter Simulation Conference, pp. 197-200. Disponível em: https://pdfs.semanticscholar.org/1761/fd8ae1fe814934a58e497259bac41bb76147.pdf Acesso em: 29 nov. 2019.

Pereira, A.S. et al. (2018). Metodologia da pesquisa científica. [e-book]. Santa Maria. Ed. UAB/NTE/UFSM. Disponível em: https://repositorio.ufsm.br/bitstream/handle/1/15824/Lic_Computacao_Metodologia-Pesquisa-Cientifica.pdf?sequence=1. Acesso em: 29 nov. 2019.

Ribeiro, I.S. (2019). Proposta de implementação de ferramentas Lean em uma microempresa do setor moveleiro de Itabira-MG. (Dissertação de Mestrado). Universidade Federal de Itajubá – UNIFEI, Itabira, MG, Brasil.

Sargent, R.G. (2010). Verification and validation of simulation models. Proceedings of the 2010 Winter Simulation Conference, pp. 166-183. Disponível em: https://www.informs-sim.org/wsc10papers/016.pdf Acesso em: 29 nov. 2019.

Serviço Brasileiro de Apoio às Micro e Pequenas Empresas. (2019). Critérios de classificação de empresas: MEI - ME - EPP. 2019. Disponível em: http://www.sebrae-sc.com.br/leis/default.asp?vcdtexto=4154 Acesso em: 29 nov. 2019.

Downloads

Published

01/01/2020

How to Cite

RIBEIRO, Ícaro S.; OLIVEIRA, C. A. de S. Process analysis of a furniture micro-enterprise by conceptual modeling and dynamic simulation. Research, Society and Development, [S. l.], v. 9, n. 2, p. e173922255, 2020. DOI: 10.33448/rsd-v9i2.2255. Disponível em: https://www.rsdjournal.org/index.php/rsd/article/view/2255. Acesso em: 18 apr. 2024.

Issue

Vol. 9 No. 2

Section

Engineerings

License

Authors who publish with this journal agree to the following terms:

1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.