Influence of the Amount of Dimension Stone Waste on Water Absorption of Soil-Cement Bricks
DOI:
https://doi.org/10.33448/rsd-v11i13.35761Keywords:
Soil-cement; Brick; Water absorption.Abstract
This paper shows the use of dimension stone waste in the manufacture of soil-cement bricks. Initially, a sample of the soil was analyzed for mineralogical composition, particle size distribution (classifying it in the proportion of silt, sand, and clay), and physical performance by plasticity (Atterberg limits specified by standard NBR 7180). A series of soil/waste/cement mixtures were prepared with contents up to 90% wt.% of dimension stone waste. The samples were characterized as mineralogical composition, microstructure, and water absorption after 7, 14, 21, 28, and 60 days. The composition with 20% wt.% of dimension stone waste presented individual and average values of water absorption according to the conditions established by standard NBR ABNT 10834 (≤22% and ≤20% respectively) and the other samples presented similar results, indicating that the dimension stone waste could be used for production of soil-cement bricks, helping to reduce the environmental impacts of the dimension stone industry.
References
American Association of State Highway and Transportation Officials AASHTO. (2003). AASHTO 411 M145-91, 2003. Standard Specifications for Classification of Soils and Soil-Aggregate 412 Mixtures for Highway Construction Purposes.
Associação Brasileira de Normas Técnicas: ABNT. (2016a). NBR 6459: Solo - Determinação do limite de liquidez: ABNT.
Associação Brasileira de Normas Técnicas: ABNT. (2016b). NBR 7180: Solo - Determinação do limite de plasticidade: ABNT.
Associação Brasileira de Normas Técnicas: ABNT. (2012a). NBR 8491: Solo-cimento – Requisitos: ABNT.
Associação Brasileira de Normas Técnicas: ABNT. (2012b). NBR 8492: Tijolo de solo-cimento — Análise dimensional, determinação da resistência à compressão e da absorção de água — Método de ensaio: ABNT.
Associação Brasileira de Normas Técnicas: ABNT. (2020). NBR ISO 10545-4: Placas Cerâmicas – Parte 4: Determinação da carga de ruptura e módulo de resistência à flexão.
Bodian, S., Faye, M., Sene, N.A., Sambou, V., Liman, O., & Thiam, A. (2018). Thermo-mechanical behavior of unfired brick and fired brick made from a mixture of clay soil and laterite. Journal of Building Engineering, 18, 172-179
Fay, L., Cooper, P., & Morais, H. F. (2014). Innovative interlocked soil-cement block for the construction of masonry to eliminate the settling mortar. Construction and Building Materials, 52, 391-395.
Grande, F. M. (2003). Fabricação de tijolos modulares de solo-cimento por prensagem manual com e sem adição de sílica ativa. Dissertação (Mestrado em Arquitetura, Urbanismo e Tecnologia) - Escola de Engenharia de São Carlos, Universidade de São Paulo, São Carlos.
Martins, M. N., Vieira C. M. F., & Holanda J. N. F. (2011) “Comportamento de massa cerâmica vermelha durante a compactação”. In: CONGRESSO BRASILEIRO DE CERÂMICA, 45, 2011, Florianópolis – SC, Anais... Santa Catarina: 2011.
Menezes, R. R., Ferreira, H. S., Neves, G. de A., & Ferreira, H. C. (2002). Uso de rejeitos de granitos como matérias-primas cerâmicas. Cerâmica, volume 48, pág. 92-101.
Moreira, J. M. S., Manhães, J. P. V. T., & Holanda, J. N. F. (2005). Reaproveitamento de resíduo de rocha ornamental proveniente do Noroeste Fluminense em cerâmica vermelha. Cerâmica, 51, 180-186.
Moreira, J. M. S., Manhães, J. P. V. T., & Holanda, J. N. F. (2008). Processing of red ceramic using ornamental rock powder waste. Journal of Materials Processing Technology, 88, 88-93.
Pires, I. B. A. (2004). A utilização do tijolo ecológico como solução para construção de habitação populares. Monografia (Graduação em Engenharia Civil) – UNIFACS
Oliveira, J. V. C., Meira, F. F. D. de A., & Chagas, L. S. V. B. (2021). Soil-cement bricks with insertion of scheelite-tailings: Mechanical behavior and physico-chemical evaluation of kneading water. Research, Society and Development, 10(6), 1-13.
Ribeiro, S. V. (2013) “Reutilização de resíduo de rocha ornamental na produção de tijolo solocimento”, Dissertação de Mestrado, UENF- Campos dos Goytacazes.
Ribeiro, V. A. S., Werdine, D., Barbosa, L. F., Pinheiro, M. V., Oliveira, A. F., Alves, A. L. Q., & Silva, L. R. R. (2021). Brick soil cement with addition of tire rubber waste. Research, Society and Development, 10(12), 1-13.
Rodrigues, D. V., Xavier, G. C., Saboya, F., Maia, P. C. A., & Alexandre, J. (2012). Durabilidade de peças cerâmicas vermelhas com adição de rejeito de rocha ornamental isenta de granalha. Cerâmica, 58, 286-293.
Siqueira, F. B., Amaral, M. C., Bou-Issa, R. A., & Holanda, J. N. F. (2016). Influência da adição de resíduo sólido industrial nas propriedades de tijolos solo-cimento. Cerâmica, 62, 237-241.
Skempton, A. W. (1953), The colloidal activity of clays. In: Proceedings of the third international conference on soil mechanics and foundation engineering. Zurich, Switzerland, ICOSOMEF, pp 57-61.
Taguchi, S. P., Santos, J. C., Gomes, T. M., & Cunha, N. A. (2014) Avaliação das propriedades tecnológicas de cerâmica vermelha incorporada com resíduo de rocha ornamental proveniente do tear de fio diamantado. Cerâmica, 60, 291-296.
Venkatarama Reddy, B. V., & Gupta, A. (2005). Characteristics of soil-cement blocks using highly sandy soils. Materials and Structure, 38:651-658.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Neilton Paixão de Jesus Junior; Filipe Pinheiro Teixeira; Edivânia Bragança Mendonça; Simone Pereira Taguchi Borges
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
