Analysis of the dimensional stability of alginate during six days after its manipulation
DOI:
https://doi.org/10.33448/rsd-v11i16.38823Keywords:
Hydrogels; Alginates; Materials for dental impressions; Dimensional measurement accuracy.Abstract
Introduction: Alginate is one of the most used elements in dental practice, its reproduction is commonly generated in the first consultation, being essential to build a primitive idea about the patient's level of oral well-being. Purpose: to explain the storage time and storage method of alginate after handling so that dimensional stability is guaranteed, through a cross-sectional field survey. Methodology: This is a laboratory test to be carried out at the multidisciplinary Laboratory of the Fametro University Center, with a qualitative approach. Results: When an analysis is carried out by material, it is observed that the CAVEX brand alginate has the highest average weight and length and the HYDROGUM 5 brand has the lowest average weight, but with an average length similar to that of the CAVEX brand. Conclusion: it was shown that the impressions of the tested alginates must be poured immediately after removal from the patient's mouth so that the impression is accurate and stable.
References
Aalaei, S., Ganj-Khanloo, R., & Gholam, F. (2017). Effect of storage period on dimensional stability of alginplus and hydrogum 5. J Dent (Tehran)., 14(1), 31-39.
Arikawa, Y. M. T. (2016). Estudo comparativo da estabilidade dimensional de moldes de alginato pelo método fotográfico. Trabalho de Conclusão de Curso apresentado à Faculdade de Odontologia de Araçatuba da Universidade Estadual Paulista “Júlio Mesquita Filho” – UNESP – SP.
Braga, A.S., Braga, S., Catirse, A., Vaz, L. C., & Spadaro, A. (2007). Potencial tóxico dos alginatos para uso odontológico. Rev. Ciênc. Farm. Básica Apl., 28(2), 153-158.
Bauer, M. W., & Gaskell, G. (2008). Pesquisa qualitative com texto: imagem e som: um manual prático. Gareschi, P. A. (trad.), 7a edição, Petrópolis, RJ: Vozes.
Calmon, J. D. Q., Relvas, A., Lefrançois, M., Azevedo, M. V., Sotelo, P., & Sotelo, L. (2019). Estabilidade dimensional de moldes obtidos com alginato de armazenamento tardio. Rev Odontol UNESP, 48, e20190098.
Cervino, G., Fiorillo, L., Herford, A. L., Laino, L., Troiano, G., Amoroso, G., Crimi, S., Matarese, M., D’Amico, C., Siniscalchi, E. N., & Cicciù, M. (2017). Alginate materials and dental impression technique: A current state of the art and application to dental practice. Mar Drugs., 17(1), 18.
Daneu, G. D., Vasconcelos, J. B., Oltramari, P. V. P., de Almeida, M. R., Guiraldo, R. D., Fernandes, T. M. F. (2020). Dimensional stability of alginate molds scanned at different storage times. Acta Odontol Latinoam., 33(3), 221-227.
De Queiroz G. L., Vasconcelos, J. B., Oltramari, P. V. P., de Almeida, M. R., Guiraldo, R. D., Fernandes, T. M. F. (2019). Efeito de diferentes agentes desinfetantes na estabilidade dimensional de materiais de moldagem. REAS., 27, e916-e916.
De Queiroz G. L., Araújo, M. D., Paula, D. M. M., Araújo, T. R., Dinelly, E. M. P., & Feitosa, V. P. (2014). Efeito de diferentes agentes desinfetantes na estabilidade dimensional em hidrocolóide irreversível de última geração. JOAC., 2(1), 01-06.
Erbe, C., Ruf, S., Wöstmann, B., & Balkenhol, M. (2012). Dimensional stability of contemporary irreversible hydrocolloids: Humidor versus wet tissue storage. J Prosthet Dent. 108(2):114-22.
Filho, D. L. S. M. (2021). A importância do controle da desinfecção de moldes e modelos de prótese dentária: revisão de literatura. Monografia (bacharel em odontologia) – Centro Universitário ARGES, Paripiranga, Bahia.
Fonte Boa, J. C., Lanza, M. D. S., Peixoto, R. T. R. da C., Drummond, A. F., & de Sousa, E. L. (2016). Análise dimensional de moldes de alginato após armazenagem. Arq Odontol., 52(2), 117-122.
Guiraldo, R. D., Ana, F.F. Moreti, J. M., Sandrine, B., Berger, 1., Luciana, L., Meneghel1, R. V. & Caixeta, M. A.C. (2015). Influence of alginate impression materials and storage time on surface detail reproduction and dimensional accuracy of stone models. Acta Odontol Latinoam., 28(2), 156-161.
Hussain, M. W., Chaturvedi, S., Naqash, T. A., Ahmed, A. R., Das G., et al. (2020). Influence of time, temperature, and humidity on the accuracy of alginate impressions. J Ayub Med Coll Abbottabad., 32(4), S659-S667.
Ibrahim, A. A., Alhajj, M. N., Khalifa, N., & Gilada, M. W. (2017). Does 6 hours of contact with alginate impression material affect dental cast properties? Compend Contin Educ Dent., 38(6), e1-e4.
Kulkarni, M. M., & Thombare, R. U. (2015). Dimensional changes of alginate dental impression materials-an invitro study. J Clin Diagn Res., 9(8), ZC98-ZC102.
Kusugal, P., Chourasiya, R. S., Ruttonji, Z., Astagi, P., Nayak, A. K., & Patil, A. (2018). Surface detail reproduction and dimensional stability of contemporary irreversible hydrocolloid alternatives after immediate and delayed pouring. Contemporary Clinical Dentistry, 9(1), 20-25.
Memon, M. R., Shaikh, N., Shaikh, T., Shah, A., & Shaikh, A. S. (2019). Impression faults using irreversible hydrocolloid impression material by undergraduate and graduate students. Pakistan Oral & Dental Journal., 39(1), 106-109.
Manar, J. (2018). Alginate as impression material. International Journal of Applied Dental Sciences., 4(3), 300-303.
Nunes, R. S., et al. (1999). Avaliação da deformação permanente de materiais de moldagem elastoméricos e alginatos. Braz Dent J., 2(1).
Oshiro Filho, N. T., Coelho, T. M. K., Schussler, J. P., Insaurralde, E., & Leme, M. P. L. (2018). Precisão dimensional de modelos obtidos de moldes de alginato: técnica da união de análogos. Arch Health Invest., 7(5).
Paula, D. M. M. D., et al. (2016). Análise da estabilidade dimensional de diferentes tipos de materiais de moldagem. JOAC., 2(2), 01-05.
Rohanian, A., Ommati, S. G, Zeighami, S., Samadi, M. J., & Shamshiri, A. R. (2014). Effect of storage time of extended-pour and conventional alginate impressions on dimensional accuracy of casts. J Dent (Tehran)., 11(6), 655-64.
Rodrigues, S. B., Augusto, C. R., Leitune, V., Samuel, S. M., & Collares, F. (2012). Influence of delayed pouring on irreversible hydrocolloid properties. Braz Oral Res., 26(5), 404-409.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Monique Ferreira Ribeiro; Tainá Veiga Rebello ; Gabriela de Figueiredo Meira; Juliana Lopes de Sá
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
