Possibility to use waste tire waste in the composition of mixtures for the manufacture of cement blocks
DOI:
https://doi.org/10.33448/rsd-v9i9.6773Keywords:
Environmental preservation; tire waste; mechanical properties; tension-deformation behavior.Abstract
The modern lifestyle has led to an increase in the amount of solid waste in the world, and waste tires are one of the most generated. Annually billions of tons of waste tires are produced, so in this study, we sought to reuse them to make materials for civil construction. For this, a laboratory research was carried out where samples were made in 50 x 100 mm cylinders with traces of 0, 10, 15 and 20% (by weight) of waste, in addition to cement, natural sand and water. The granulometric distribution of waste tires and sand was also carried out. And, with the samples in cylinders, the physical and mechanical properties were evaluated, such as water absorption and apparent density, in addition to the analysis of the mechanical resistance to compression and the modulus of elasticity. The results showed that the granulometric distribution of the tire residue fits as a fine aggregate, similar to the sand granulometry. The water absorption rate of the waste specimens was less than 10%. However, the mechanical resistance decreases proportionally as the amount of tire waste has increased. However, when analyzing the behavior of the stress x strain curves, the specimens containing residues, became more flexible, as they are capable of supporting loads beyond the maximum stress. In this way, the resistance and the ability to absorb energy were increased. We concluded that it is possible to incorporate certain quantities of waste tires in blocks for civil construction, but without a structural function.
References
(Ibama), C. (1999). Conselho Nacional do Meio Ambiente, CONAMA n° 230 de 1999. Retrieved from https://www.contabeis.com.br/legislacao/4814/resolucao-conama-258-1999.
Andrade, H. D. S. (2007). Thesis university degree: Universidade Federal de Santa Catarina. Retrieved from https://repositorio.ufsc.br/handle/123456789/122280.
Barbuta, M., Rujanu, M., & Nicuta, A. (2016). Characterization of Polymer Concrete with Different Wastes Additions. Procedia Technology, 22, 407–412. https://doi.org/10.1016/J.PROTCY.2016.01.069.
Bravo, M., & De Brito, J. (2012). Concrete made with used tyre aggregate: Durability-related performance. Journal of Cleaner Production, 25, 42–50. https://doi.org/10.1016/j.jclepro.2011.11.066.
Callister, Jr., W. D. (2012). Materials Science and Engineering: an Introduction (7 th ed.). Rio de Janeiro: LTC - Livros Técnicos e Científicos Editora Ltda.
Da Silva, F. M., Gachet Barbosa, L. A., Lintz, R. C. C., & Jacintho, A. E. P. G. A. (2015). Investigation on the properties of concrete tactile paving blocks made with recycled tire rubber. Construction and Building Materials, 91, 71–79. https://doi.org/10.1016/j.conbuildmat.2015.05.027.
Dong, Q., Huang, B., & Shu, X. (2013). Rubber modified concrete improved by chemically active coating and silane coupling agent. Construction and Building Materials, 48, 116–123. https://doi.org/10.1016/j.conbuildmat.2013.06.072.
Ferreira, I. K., Gachet-Barbosa, L. A., Cecche Lintz, R. C., Russo Seydell, M. R., & Jaquiê Ribeiro, L. C. L. (2013). Evaluation of the behaviour of mortar with the addition of rubber. In Advanced Materials Research. https://doi.org/10.4028/www.scientific.net/AMR.742.456.
Frasson Junior, A. (2000). Proposta de metodologia de dosagem e controle do processo produtivo de blocos de concreto para alvenaria estrutural. Departamento de Engenharia Civil. Universidade Federal de Santa Catarina. Retrieved from http://repositorio.ufsc.br/xmlui/handle/123456789/78274.
Gesolu, M., & Güneyisi, E. (2011). Permeability properties of self-compacting rubberized concretes. Construction and Building Materials, 25(8), 3319–3326. https://doi.org/10.1016/j.conbuildmat.2011.03.021.
Issa, C. A., & Salem, G. (2013). Utilization of recycled crumb rubber as fine aggregates in concrete mix design. Construction and Building Materials, 42, 48–52. https://doi.org/10.1016/j.conbuildmat.2012.12.054.
Jalal, M., Nassir, N., & Jalal, H. (2019). Waste tire rubber and pozzolans in concrete: A trade-off between cleaner production and mechanical properties in a greener concrete. Journal of Cleaner Production, 238, 117882. https://doi.org/10.1016/j.jclepro.2019.117882.
Khaloo, A. R., Dehestani, M., & Rahmatabadi, P. (2008). Mechanical properties of concrete containing a high volume of tire – rubber particles. Waste Management, 28(12), 2472–2482. https://doi.org/10.1016/j.wasman.2008.01.015.
Li, D., Zhuge, Y., Gravina, R., & Mills, J. E. (2018). Compressive stress strain behavior of crumb rubber concrete (CRC) and application in reinforced CRC slab. Construction and Building Materials, 166, 745–759. https://doi.org/10.1016/j.conbuildmat.2018.01.142.
Ling, T. C. (2012). Effects of compaction method and rubber content on the properties of concrete paving blocks. Construction and Building Materials, 28(1), 164–175. https://doi.org/10.1016/j.conbuildmat.2011.08.069.
Lintz, R. C. C., Barbosa, L. A. G., Seydell, M. R. R., & Jacintho, A. E. P. G. A. (2010). Avaliação do comportamento de concreto contendo borracha de pneus inservíveis para utilização em pisos intertravados. Revista de Engenharia Civil-UM, 37, 17–26.
Norbert Suchanek. (2017). Fumaça Preta – Porque não é muito inteligente queimar pneus de ônibus. Retrieved October 18, 2019, from https://www.ecodebate.com.br/2017/05/03/fumaca-preta-porque-nao-e-muito-inteligente-queimar-pneus-ou-onibus-artigo-de-norbert-suchanek/
Pelisser, F., Zavarise, N., Longo, T. A., & Bernardin, A. M. (2011). Concrete made with recycled tire rubber: Effect of alkaline activation and silica fume addition. Journal of Cleaner Production, 19(6–7), 757–763. https://doi.org/10.1016/j.jclepro.2010.11.014.
Pereira, A. S., Shitsuka, R., & Computação, L. E. M. (2018). Metodologia da pesquisa científica [e-book]. Santa Maria. Ed. UAB/NTE/UFSM. https://repositorio.ufsm.br/bitstream/handle/1/15824/Lic_Computacao_Metodologia-Pesquisa-Cientifica.pdf?sequence=1.
Sadek, D. M., El-Attar, M. M., & Ali, H. A. (2016). Reusing of marble and granite powders in self-compacting concrete for sustainable development. Journal of Cleaner Production, 121, 19–32. https://doi.org/10.1016/j.jclepro.2016.02.044.
Shen, W., Shan, L., Zhang, T., Ma, H., Cai, Z., & Shi, H. (2013). Investigation on polymer-rubber aggregate modified porous concrete. Construction and Building Materials, 38, 667–674. https://doi.org/10.1016/j.conbuildmat.2012.09.006.
Silva, T. D., Paula, H. M. De, & Silva, D. (2017). Uso de granulado de borracha em substituição parcial ao agregado miúdo na produção de tijolos ecológicos Use of crumb rubber to partially replace fine aggregate in the production of green bricks.
Son, K. S., Hajirasouliha, I., & Pilakoutas, K. (2011). Strength and deformability of waste tyre rubber-filled reinforced concrete columns. Construction and Building Materials, 25(1), 218–226. https://doi.org/10.1016/j.conbuildmat.2010.06.035.
Thomas, B. S., Gupta, R. C., & Panicker, V. J. (2016). Recycling of waste tire rubber as aggregate in concrete: Durability-related performance. Journal of Cleaner Production, 112, 504–513. https://doi.org/10.1016/j.jclepro.2015.08.046.
Tutikian, B. F., Isaia, G. C., & Helene, P. (2011). Concreto de Alto e Ultra-Alto Desempenho, (1990).
Verzegnassi, E., Lintz, R., Barbosa, L., & Jacintho, A. (2012). Conventional concrete with addition of recycled rubber tires: Study of the mechanical properties. Estudos Tecnológicos Em Engenharia, 7(2), 98–108. https://doi.org/10.4013/ete.2011.72.03.
Yilmaz, A., & Degirmenci, N. (2009). Possibility of using waste tire rubber and fly ash with Portland cement as construction materials. Waste Management, 29(5), 1541–1546. https://doi.org/10.1016/j.wasman.2008.11.002.
Yung, W. H., Yung, L. C., Hua, L. H., Her, W., Chin, L., & Hsien, L. (2013). A study of the durability properties of waste tire rubber applied to self-compacting concrete. Construction and Building Materials, 41, 665–672. https://doi.org/10.1016/j.conbuildmat.2012.11.019.
Zak, P., Ashour, T., Korjenic, A., Korjenic, S., Wu, W., Korjenic, A., … Korjenic, S. (2015). The influence of natural reinforcement fibers, gypsum and cement on compressive strength of earth bricks materials. Construction and Building Materials, 106, 179–188. https://doi.org/10.1016/j.conbuildmat.2015.12.031.
Zhu, Q., Dai, H., Chen, D., & Liang, Z. (2019). Study on Influence of Waste Tire Rubber Particles on Concrete Crack Resistance at Early Age. IOP Conference Series: Earth and Environmental Science, 242(5). https://doi.org/10.1088/1755-1315/242/5/052060.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2020 Maria Gabriela Araujo Ranieri, Maria Auxiliadora de Barros Martins, Patrícia Capellato, Mirian de Lourdes Noronha Motta Melo, Adilson da Silva Mello
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
